WW60JET
Dual intensifier structure design, reducing failure rate
6.5L/min large flow design, which can drive 1-4 robot armsat the same time
60,000psi ultra-high pressure, ensuring production efficiency
Universal intensifier design reduces procurement difficulty
2L large accumulator creates stable water jet
• PLC Based Controls
• Basic Control for Pump On/Off, E-Stop
• Hydraulic Shift
• Manual Cooling Water Valve (Oil/Water Heat Exchanger)
• Remote Start/Stop, E-Stop, Hi/Low Panel
• Intensifier Pump w/10 Micron Filter and Pressure Gauge
• Return Line Oil Filter with Service Indicator
• Dual Pressure Compensator Included
• Low Inlet Water Pressure Safety Switch (30psi)
• 60,000 psi Design Pressure
Brand | WINWIN | Model | WW60JET |
Attenuator capacity | 2L | Driving mode | High performance motor |
Voltage | 380V | Application | Water jet cutting system |
Rated power | 60HP | Maximum water flow | 6.5L/min |
Working pressure | 420Mpa | Continuous working pressure | 320Mpa-380Mpa |
Driving orifices Qty. | 1-4 | Temperature | 5-40°C |
Hydraulic oil type | No.46 anti-wear oil | Cooling method | Cool-heat exchanger |
Size (L * w * h) | 1.7m*1.1m*1.4m | Weight | 1.5T |
