100,000psi pump
The newly designed end bell hard seal (HSEC) pressure intensifier determines the trend of the waterjet industry.
The standard type and servo type of SCREAMLINE PRO can be installed and operated independently, or can be operated remotely through any central control system.
UHP intensifier pump to achieve ultra-thick material cutting
Up to 300mm metal thickness
Efficient cutting, saving 40% of time
Features
Long service life seals guaranteed for 500 hours (Terms & conditions apply)
Metal-to-metal seal design is more durable with no wear in the high pressure cylinder bore
Tie Rod Design with hydraulic loading tensioner guarantees longer lifetime of seals
Stainless steel liner adds extra protection to ceramic plunger for longer life
Brand | WINWIN | Model | Scremlin Pro |
Name | 100,000psi pump | Temperature | 5-40°C |
Pressure Range | 100,000psi | Oil Level and Temperature Control | Sensor |
Low Pressure Filter | 10 µm abs. | Application | Water jet cutting system |
Voltage | 380V | Rated power | 60hp (45kw) |
Attenuator capacity | 2L | Nom. Current at 480V/60Hz (Full Load Amp) | 70 A |
Maximum water flow | 0.78 gal/min (2.9 lpm) | Min. Cutting Water Inlet Flow | 4.0 gal (15.1 L) |
Hydraulic Tank Capacity | 220L | Size (L * w * h) | 2.2m*1.4m*1.5m |
Weight | 1.5T |
60,000psi vs. 100,000psi
The diagrams shows the Win Win 100,000PSI pumps compared to standard 60,000PSI (50hp) waterjet pumps. The data demonstrates when cutting 1 inch aluminum at 100,000PSI, there is a significant improvement in productivity,
lower cost per part and substantial abrasive savings.
SCREAMLINE PRO ADVANTAGE
Designed for maximum productivity, profitabilty, and extended performance. Combines the lowest cost of operating a waterjet pump with outstanding WINWIN Genuine Service support to provide optimum value.
