SL-VI 100HP Large flow servo Intensifier pump
Our SCREAMLINE SL-VI 100HP standard and servo system ultra-high pressure pumps represent the new quality standard of WIN-WIN waterjet system. The newly designed end bell hard seal (HSEC) pressure intensifier determines the trend of the waterjet industry.
SCREAMLINE SL-VI 100HP standard type and servo type can help you provide ultra-high pressure for pure water and abrasive cutting applications, no matter how your system is designed: the standard type and servo type of SCREAMLINE SL-VI 100 HP can be installed and operated independently, or can be operated remotely through any central control system.
Advantages
Large flow
7.6L/min water flow pump can supply multiple cutting heads at the same time, can cut metal with a thickness of more than 200mm.
servo motor
Servo motor is used to save energy and electricity, operate quietly, stabilize pressure and prolong the service life of intensifier pump.
Maintenance free design
The metal hard seal structure is adopted, and the rubber seal is removed, which can be used for a long time. The accumulator adopts an integral structure, which is truly maintenance free.
Waterjet intensifier pump with servo motor
2.Low noise
3.Pressure stability
4.Prolong the life of high pressure parts
5.Energy saving 20%
Brand | WIN-WIN | Name | Waterjet servo motor intensifier pump |
Model | SL-VI (100HP) | Working ambience | 5-40°C |
Driving mode | Servo motor | Application | Robot waterjet cutting system |
Power | 220V/380V | Rated power | 100HP |
Capacity of attenuator | 2L | Max work pressure | 420Mpa |
Maximum water flow rate | 7.6L/min | Number of orifices | 6 |
Oil tank volume | 220L | Dimension(L*W*H) | 2.2m*1.4m*1.6m |
Weight | 1.5t |
Applications of sL-VI 100HP
It is widely used in the automotive interior water jet cutting industry. A SL-VI 100HP pump can drive 1-6 0.17mm cutting heads, with a flow rate of 7.6L/min, which is outstanding in production efficiency. The SL-VI 100HP pump has good stability and can be maintained once every two months. There are many series of SL-VI series pumps, ranging from 22KW to 75kW. Each pump has a standard type and a servo motor type, and the pressure can reach 4136bar, The normal working pressure can reach 3800bar.
Winwin pump can operate at low temperature in hot ambient
The intensifier pump produced by WIN-WIN solves the problem of high temperature and can maintain good temperature operation in hot environment, which is very important for the stability of the equipment.
The details
Pay attention to details and focus on quality
Features of Servo Motor SCREAMLINE SL-VI(100HP)
1. Servo Motor to Oil Pump, Power-Cost 15% Reduction
2. Stable Working Pressure, Fast Reaction, Low Fluctuation of Waterjet Pressure
3. Dual Intensifier Design, Alteration-Work Mode, Suitable to 24/7 continuous working
4. Variable Pump with 2L Attenuator, Stable Working Pressure, Extending service life of Accessories.
5. Noise ＜63 dbs. Better Working Environment.
6. Comprehensive fault detection and troubleshooting, real-time monitoring of important values such as pressure, speed, hydraulic oil level, etc.
7. Can support Max. 6 pieces of Orifices, improving the working efficiency.
8. Double Oil-Filtration at Oil Pump Inlet and Return Port, keep on good quality Oil.
Other types
90,000psi PUMP
SL-VI 50HP
